Product ID:707-107,FORMULA 129/63, MIL-P-16189, BLACK
MSDS Date:01/01/1985
FSC:8010
NIIN:00-753-4945
MSDS Number: BFNFJ

AMERON INDUSTRIAL COATINGS DIVISION

201 N BERRY ST
BREA, CA 92621-3904
US

Emergency Phone: 714-529-4597

Info Phone: 714-529-4597

Cage: 09869

AMERON INDUSTRIAL COATINGS DIVISION

BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: 09869

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2.12%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 6-16%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Effects of Overexposure:ANESTHETIC, IRRIT OF RESPIRATORY TRACT OR ACUTE
NERVOUS SYS.DEPRESSION, EYE & SKIN IRRITATION.

First Aid:IN CASE OF CONTACT,FLUSH SKIN & EYES WITH PLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING.IF INHALED, REMOVE TO FRESH
AIR. CALL A DR IF SYMPTOMS PERSIST.

Flash Point:60F (TCC)
Lower Limits:1.0
Extinguishing Media:SMALL FIRE-CO*2 OR DRY CHEM.LARGE FIRE-POLYMER FOAM
Fire Fighting Procedures:SELF-CONTND BRTHG APPAR SHOULD BE AVAILABLE
FOR FIREMEN
Unusual Fire/Explosion Hazard:CLOSED CONTAINER EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES (FLAMES,HOT
SURFACES & ELECTRICAL,STATIC OR FRICTION SPARKS).AVOID BREATHING
VAPORS.VENTILATE AREA.REMOVE WITH INERT ABSORBENT & NON-SPARKING
TOOLS.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LARGE
QUANTITIES IN BLDGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS ONE FLAMMABLE (OR COMBUSTIBLE LIQUID)
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING.AVOID FREE
FALL OF LIQ. IN EXCESS OF A FEW INCHES.CONTAINER SIZE: 1 GAL. VAP
PRESS IS BASED ON A SINGLE INGREDIENT IN PRODUCT.

Respiratory Protection:USE NIOSH/MSHA APPRVD PAINT OR AIR SUPPLIED
RESPIRATORS.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST AS NECESSARY
Protective Gloves:MFR RECM
Eye Protection:MFR RECM
Other Protective Equipment:PREVENT PROLONG SKIN CONTACT TO CONTAMINATED
CLOTHING
Supplemental Safety and Health
PROTECTIVE GLOVES REQ FOR PROLONG/REPEATED CONTACT.EYE PROTECTION:USE
SAFETY EYEWEAR DESIGNED TO PROTECT AGAINST SPLASH OF
LIQUID.RESPIRATOR USE BASED ON CHEM CONC & CONDITIONS OF USE.

HCC:F2
Boiling Pt:B.P. Text:237-287 F
Vapor Pres:16
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:56

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT & HOT SURFACES

Waste Disposal Methods:DISPOSE IAW LOCAL,STATE & FEDERAL
REGULATIONS.MFR RECM-INCINERATE IN APPRVD FACILITY.DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.